Adjusting The Characteristic Map Of The Throttle Response - Husqvarna FC 450 2018 Repair Manual

7 HANDLEBAR,CONTROLS
50
Ad"usting the characteristic ma of the throttle res onse
Info
On the throttle grip, the characteristic map of the throttle response is changed by changing the guide
plate.
A guide plate with a different characteristic map is supplied.
Main work
-
Move the handlebar to the straight-ahead position.
O.
Push back sleeve
8.
-
Loosen nut
8
-
Turn adjusting screw
8.
-
Loosen nut
(D
-
Push cold start button
0
-
Turn adjusting screw
to the basic position when the throttle grip is turned to the
front.
8-
-
Tighten nut
8
Turn barrel adjuster so that there is play in the throttle
cable at the throttle grip.
Guideline
I Throttle cable play
@}.
Tighten nut
O.
-
Slide on sleeve
-
Check the throttle grip for smooth operation.
Finishing work
-
Check throttle cable play.
-
Install the fuel tank. (0 p. 103)
-
Install the right side cover.
-
Mount the seat. (0 p. 101)
-
Install the air filter box cover.
Main work
O.
-
Push back sleeve
8
-
Remove screws and half-shells
-
Detach the throttle cables and take off the grip tube.
in as far as possible.
all the way to the stop.
so that the cold start button moves
I 3 ... 5 mm (0.12 ... 0.2 in)
(0 p. 49)
(0 p. 100)
(0 p. 96)
8.
..