Husqvarna FC 450 2018 Repair Manual page 250

18 CLUTCH
Check the contact surface of clutch pressure cap @ for damage and wear.
Check clutch center
Check damping rubber pieces G) for damage and wear.
Check inner clutch hub G) for damage and wear.
Check the thrust surfaces of the clutch facing discs in clutch basket
Check needle bearings
Check intermediate clutch discs €1) for damage and wear.
Check clutch facing discs .. for discoloration and scoring.
Check the thickness of the clutch disc pack.
Clutch disc pack - thickness
248
If there is damage or wear:
-
Change the spring washer.
If there is damage or wear:
-
Change the clutch pressure cap.
4B,
for damage and wear.
If there is damage or wear:
-
Change the clutch center.
If there is damage or wear:
-
Change the damping rubber pieces.
If there is damage or wear:
-
Change the inner clutch hub.
If there is damage or wear:
-
Change the clutch facing discs and the clutch basket.
4B,
and collar bushing
If there is damage or wear:
-
Change the needle bearings and collar bushing.
If the intermediate clutch discs are not level and are pitted:
-
Change all intermediate clutch discs.
If there is discoloration or scoring:
-
Change all clutch facing discs.
Wear limit
If the clutch disc pack does not meet specifications:
-
Change the clutch disc pack.
48
for damage and wear.
48
for damage and wear.
� 26.4 mm ( � 1.039 in )
48
Mount collar sleeve and needle bearing �.