9 SHOCK ABSORBER, LINK FORK
58
Checking the riding sag of the shock absorber
Ad"usting the s
Caution
Parts of the shock absorber will move around if the shock absorber is detached incor
Risk of injury
rectly.
The shock absorber is filled with highly compressed nitrogen.
-
Please follow the description provided.
Info
Note the current adjustment before changing the spring preload -e.g. measure the spring length.
-
Measure dimension 6) of rear wheel unloaded.
-
With another person holding the motorcycle, the rider, wear
ing full protective clothing, sits on the seat in a normal sitting
position (feet on footrests) and bounces up and down a few
times.
✓ The rear wheel suspension levels out.
-
Another person again measures the distance between the
rear axle and marking SAG on the rear fender using the sag
gage.
-
Note down the value as dimension (8.
Info
The riding sag is the difference between measure
ments 6) and (8.
-
Check the riding sag.
I Riding sag
If the riding sag differs from the specified measurement:
-
Adjust the riding sag.
reload of the shock absorber
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the shock absorber.
-
After removing the shock absorber, clean it thoroughly.
(0
p. 57)
1105 mm (4.13 in)
(0
p. 59)
(0
p. 12)
p. 60)
(0
..