Concluding Steps - Fujitsu PRIMERGY RX2520 M4 Upgrade And Maintenance Manual

Figure 195: Connecting the cables to the system board and PSAS controller
Ê Connect the plugs of the LTO PWR/SAS cable C38:
– (1) Power plug to connector "PWR ODD" on the system board.
– (2) SAS plug to connector "MLC1" on the PSAS controller in slot 1.

12.4.1.4 Concluding steps

"Installing the fan holder" on page 64
Ê
"Reassembling" on page 55
Ê
"Connecting the power cord" on page 59
Ê
"Switching on the server" on page 60
Ê
"Resuming BitLocker functionality" on page 89
Ê
RX2520 M4
Upgrade and Maintenance Manual
Accessible drives
293