Removing The Sas Expander Board; Concluding Steps - Fujitsu PRIMERGY RX2520 M4 Upgrade And Maintenance Manual

Ê Remove the two screws (see circles).
Ê Push the SAS expander board holder towards and take it out of the chassis
(see blue arrow).

7.3.12.3 Removing the SAS expander board

Figure 61: Removing the SAS expander board
Ê Remove one screw (see circle).
Ê Push the SAS expander board in the direction of the arrow.
Ê Take off the SAS expander board from the SAS expander board holder.

7.3.12.4 Concluding steps

"Installing the fan holder" on page 64
Ê
"Installing the air duct" on page 62
Ê
"Reassembling" on page 55
Ê
"Connecting the power cord" on page 59
Ê
"Switching on the server" on page 60
Ê
"Resuming BitLocker functionality" on page 89
Ê
RX2520 M4
Hard disk drive (HDD) and solid state drive (SSD)
Upgrade and Maintenance Manual 153