Removing A Psu - Fujitsu PRIMERGY RX2520 M4 Upgrade And Maintenance Manual

6.2.2.3

Removing a PSU

Ê Remove the power cord from the PSU, see section
power cord" on page
Figure 27: Unlocking and removing the PSU
Ê Push the handle of the PSU halfway upward in the direction of the arrow (1).
Ê Push the lock in direction of the arrow (2).
Ê Grip the handle and pull out the PSU in the direction of the arrow (3).
V
CAUTION!
Never leave the bay for the PSU empty for more than two minutes during
operation. Otherwise, excessive temperatures could damage system
components.
RX2520 M4
49.
Upgrade and Maintenance Manual
Power supply unit (PSU)
"Disconnecting the
107