Connecting A 3.5-Inch Hdd Backplane; Concluding Steps - Fujitsu PRIMERGY RX2520 M4 Upgrade And Maintenance Manual

7.4.7.4

Connecting a 3.5-inch HDD backplane

I
For the cable plan, see chapter
Figure 79: Connecting cables to the backplane (example 4x 3.5-inch HDDs)
Ê Connect the cables to the backplane:
– (1) Corresponding SAS cable to connector "X9"
– (2) Power cable to connector "X40"
– (3) If applicable, OOB cable to connector "X11"
– (4) If applicable, ODD power cable to connector "X17" (only for the first
backplane)
7.4.7.5

Concluding steps

"Installing the fan holder" on page 64
Ê
"Installing the air duct" on page 62
Ê
"Reassembling" on page 55
Ê
"Installing 3.5-inch HDD modules" on page 162
Ê
"Connecting the power cord" on page 59
Ê
"Switching on the server" on page 60
Ê
"Resuming BitLocker functionality" on page 89
Ê
RX2520 M4
Hard disk drive (HDD) and solid state drive (SSD)
"Appendix B" on page
Upgrade and Maintenance Manual
411.
173