Connecting A 2.5-Inch Hdd Backplane - Fujitsu PRIMERGY RX2520 M4 Upgrade And Maintenance Manual

7.3.8.4

Connecting a 2.5-inch HDD backplane

I
For the cable plan, see chapter
Figure 55: Connecting cables to the backplane (example 8x 2.5-inch HDDs)
Figure 56: Connecting cables to the backplane (example 16x 2.5-inch HDDs)
Ê Connect the cables to the backplane:
– (1) Corresponding SAS cable to connector "X10"
– (2) Power cable C11 to connector "X40"
– (3) If applicable, OOB cable C7 to connector "X11"
– (4) Corresponding SAS cable to connector "X9"
– (5) ODD power cable (first backplane) and if applicable, SAS expander
board power cable (second backplane) to connector "X17"
RX2520 M4
Hard disk drive (HDD) and solid state drive (SSD)
"Appendix B" on page
Upgrade and Maintenance Manual
411.
143