Removing The Front Panel Module - Fujitsu PRIMERGY RX2520 M4 Upgrade And Maintenance Manual

Front panel

13.3.1.2 Removing the front panel module

Ê Remove the ID card, see
Figure 223: Disconnecting the front panel cables
Ê Disconnect the front panel cable and front USB3.0 cable from the system
board (see arrows).
Ê If applicable, disconnect the cables of the ODD.
I
To get enough space for disconnecting the ODD SATA cable, remove
the expansion card from slot 4, see section
cards" on page
324
figure 270 on page
213.
Upgrade and Maintenance Manual
387.
"Removing expansion
RX2520 M4