Kontron COMe-cEL6 User Manual page 88

Sub-screen Next Level Sub-screens / Description
PCH/IO
Extended BIOS
Configuration> Range Decode>
(continued)
Sub-Screen Next level Sub-screens / Description
IGD Data Format>
Configuration>
Resolution>
Color Depth>
Channel Count>
eDP Port Configuration
eDP Port>
Integrated eDP to LVDS Bridge>
LFP Resolution>
Backlight Control>
PWM Frequency>
Backlight Value>
LVDS Clock Center Spreading>
www.kontron.com
Enable: redirects memory cycles falling in a specific area to SPI flash
controller.
[Enabled, Disabled]
Read only field
[EDID 1.4 ]
Read only field
[1024x768 ]
Read only field
[24 bit ]
Read only field
[Single Channel]
[Enabled, Disabled]
[Disabled, Auto]
Selects the LFP used by internal graphics device:
[Auto, Custom, PAID,
WVGA 800x480 1x18,
XGA 1024x768 1x18,
WXGA 1280x768 1x24,
WVGA 1366x768 1x24,
WSVGA 1280x600 1x24]
Backlight control setting.
[None/External, PWM, PWM Inverted, I2C, I2C Inverted]
Set LCD backlight PWM frequency.
[200 Hz, 400 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 20 kHz, 40 kHz]
Set LCD Backlight brightness (1-255). [255]
Select the LVDS Clock frequency center spreading depth
[No Spreading, 0.5%, 1.0%, 1.5%, 2.0%, 2.5%]
COMe-cEL6 - User Guide, Rev.1.2
VGA 640x480 1x18
SVGA 800x600 1x18
XGA 1024x768 1x24
WXGA 1280x800 1x18
WSVGA 1280x600 1x18
// 88