Kontron COMe-cEL6 User Manual page 79

Sub-screen Next Level Sub-screens / Description
System Agent Memory
Configuration>
(SA)
Configuration> (continued)
(continued)
Graphics
Configuration>
VT-d>
X2APCI Opt Out>
DMA Control
Guarantee>
IGD VTD
Enable>
IPU VTD
Enable>
IOP-VTD
Enable>
ITBT VTD
Enable>
www.kontron.com
Train On Warm [Enabled, Disabled]
Boot>
BDAT Memory Read Only field
Test Type>
[Rank margin Tool Rank]
Skip Scanning of Enabled- will not scan for external Gfx card on PEG and
Exernal Gfx Card> PCH PCIe ports
[Enabled, Disabled]
Primary Display> Select the graphics device which is the primary display
or select HG for hybrid Gfx.
[Auto, IGFX, PEG, PCI]
External Graphics Primary PCI>
Cards Primary
Display
Configuration>
[Auto, Disabled, Enabled]
Internal
Graphics>
GTT Size> [2MB, 4MB, 8MB]
Aperture Size> [128MB, 256MB, 512MB, 1024MB, 2048MB]
DVMT Pre- Selects the pre-allocated (fixed) graphics memory size
allocated> used by the internal device
[ 32M, 64M, 96M 128M, 160M, 4M, 8M, 12M , 16M, 20M,
24M, 28M, 32M/F7, 36M, 40M, 44M, 48M, 52M, 56M ,
60M]
DVMT Total Gfx Selects the total graphics memory size used by the
Mem> internal device [128M, 256M, Max]
PM Support> [Enabled, Disabled]
PAVP Enable> [Enabled, Disabled]
[Enabled, Disabled]
[Enabled, Disabled]
[Enabled, Disabled]
[Enabled, Disabled]
[Enabled, Disabled]
[Enabled, Disabled]
[Enabled, Disabled]
COMe-cEL6 - User Guide, Rev.1.2
Select:
Auto/PCIE1 to PCIe7 of D28: F0 to F7,
PCIE8 to PCIE15 of D29: FO to FF7,
PCIE16 to PCIe19 of D27: F0 to F3,
Graphics device should be primary
PCIE
[Auto, PCIE1, PCIe2,........ PCIE18,
PCIE19]
// 79