Kontron COMe-cEL6 User Manual page 83

Sub-screen Next Level Sub-screens / Description
PCH-IO SATA
Configuration>
Configuration>
(continued)
www.kontron.com
SATA Controllers>
SATA Port Multiplier>
SATA Mode Selection>
SATA Test Mode>
Software Feature
Mask Configuration>
Software Feature
Mask Configuration>
(continued)
Aggressive LPM
Support>
Serial ATA>
Software Preserve>
Port [#]>
Hot Plug>
Configure as eSATA>
External>
SPIN Up Device>
SATA Device Type>
Topology>
SATA Port 0 DevSLP>
[Enabled, Disabled]
Determines how the SATA controllers(s) operate
[AHCI]
[Enabled, Disabled]
[Enabled, Disabled]
HDD Unlock>
LED Locate>
LED Locate>
(continued)
Enable PCH to aggressively enter link power state
[Enabled, Disabled]
Read only field
CT120BX500SSD1 (120.0 GB)
Read only Field
SUPPORTED
Enable or disable the SATA port [0 or 1]
[Enabled, Disabled]
Designates port as hot pluggable
[Enabled, Disabled]
Read only Field
Hot Plug Supported
Marks port as External
[Enabled, Disabled]
Enable staggered spin up performed only on drives
with option enabled spin up at boot. Otherwise all
drives spin up at boot
[Enabled, Disabled]
Identified the drive type
[Hard Disk Drive, Solid State drive]
Identify the SATA topology
[Unknown, SATA, Direct Connect, Flex, M2]
For DevSLP both hard drive and SATA port need to
support DevSLP function otherwise, unexpected
behavior might happen. Check module design
before enabling.
[Enabled, Disabled]
COMe-cEL6 - User Guide, Rev.1.2
Enabled: Indicates HDD
password unlock in OS is
enabled
[Enabled, Disabled]
Enabled: Indicates
LED/SGPIO hardware is
attached and ping to
locate feature is enabled
on OS
[Enabled, Disabled]
// 83