Kontron COMe-cEL6 User Manual page 68

Sub-screen Next Level Sub-screens / Description
PCH-FW Firmware Update
Configuration> Configuration>
(continued) (continued)
Thermal Enable all
Consideration> Thermal
Functions>
CPU Thermal
Configuration>
www.kontron.com
Anti-Rollback
Set HW-
SVN
enforced
Configuration>
Anti-Rollback
(continued) for Current
SVN>
OEM Key Automatic
Revocation OEM Key
Configuration> Revocation>
Invoke OEM
Key
Revocation>
Enable: for memory thermal management, active trip points, critical
trip points. Disable: for manual configuration
[Enabled, Disabled]
DTS SMM> Disable: uses ED reported temperature values.
Enable: uses DTS SMM mechanism to obtain CPU
temperature values.
Out of Spec: uses EC reported temp values and DTS
SMM and DTS is used to handle Out of Spec
condition
[Enabled, Disabled, Critical Temp Reporting]
TCC Active TCC active Offset rage [0 to 63]
Offset>
Temperature at which the thermal control circuit
must be activated. [0]
TCC Offset For Running Average Temperature Limits (RATL)
Time Window> feature, the offset time range is 5 ms to 448 s.
[Disabled, 10ms, 55ms ... 192sec, 224sec, 254sec]
TCC Offset For Running Average Temperature Limits (RATL)
Clamp Enable> feature, to allow CPU to throttle below P1
[Enabled, Disabled]
TCC Offset Lock For Running Average Temperature Limits (RATL)
Enable> feature, to lock temperature target MSR.
[Enabled, Disabled]
Bi-directional When processor thermal sensor trips (either core)
PROCHOT#> PROCHOT# is driven. When bi-directional enabled
external agents drive PROCHOT# to throttle the
processor. [Enabled, Disabled]
Disable [Enabled, Disabled]
PROCHOT#
Output>
Disable VR [Enabled, Disabled]
Thermal Alert>
PROCHOT [Enabled, Disabled]
Response>
PROHOT Lock> [Enabled, Disabled]
ACPI T-States> [Enabled, Disabled]
COMe-cEL6 - User Guide, Rev.1.2
Hardware enforced anti-rollback
for current ARB-SVN value.
Firmware with lower ARB-SVN is
blocked from execution. Value
will be restored to disable after
the command is sent.
[Enabled, Disabled]
Enable: Bios automatically sends
HECI command to revoke OEM
keys.
[Enabled, Disabled]
Enable: HECI command sent to
revoke OEM key
[Enabled, Disabled]
// 68