Kontron COMe-cEL6 User Manual page 84

Sub-screen Next Level Sub-screens / Description
PCH-IO SATA
Configuration>
Configuration>
(continued)
(continued)
Sub-screen Next Level Sub-screens / Description
PCH-IO USB
Configuration>
Configuration>
Sub-screen Next Level Sub-screens / Description
PCH-IO Security
Configuration>
Configuration>
Sub-screen Next Level Sub-screens / Description
PCH-IO
HD Audio
Configuration>
Configuration>
www.kontron.com
SATA Port 0
RXPolarity>
DITO Configuration>
DITO Value>
DM value>
XHCI Compliance
Mode>
XDCI Support>
USB2 PHY Sus Well
Power Gating>
USB3 Link Speed
Selection>
USB PDO
Programming>
USB Overcurrent>
USB Over Current
Lock>
USB port Disable
Override>
USB Device/HOST
Mode Override>
RTC Memory Lock>
BIOS Lock>
HD Audio>
Disable is default- check module design before
enabling.
[Enabled, Disabled]
[Enabled, Disabled]
Read Only port
[625]
Read Only port
[15]
Disabled is default
Change to enable for Compliance mode testing
[Enabled, Disabled]
Read only field
[Enabled, Disabled]
Enable Sus well PG for USB2 PHT. Has no effect on
PCH-H. [Enabled, Disabled]
Selects USB3 link speed
[GEN 1, GEN2]
Select if port Disable Override (PDO) used
[Enabled, Disabled]
Disable for pin-based debug. If Pin-based debug
enabled and USB overcurrent is not disabled, USB
Dbc does not work.
[Enabled, Disabled]
Select if USB Over current used. Enabling make xHC
controller consume Overcurrent mapping data
[Enabled, Disabled]
Enable or disable the corresponding USB port from
reporting a device connection to the controller
[Disabled, select per-Pin]]
Enable or disable the corresponding USB 2.0 and
USB 3.1 port device mode
[Disabled, select per-Pin]
Enable Locks bytes 38h-3Fh in the lower/upper
128-byte bank of RTC RAM
[Enabled, Disabled]
PCH BIOS Lock enable feature. Enable to ensure
SMM protection of Flash.
[Enabled, Disabled]
Controls detection of the audio device
Disable: HDA unconditionally disabled
COMe-cEL6 - User Guide, Rev.1.2
// 84