Kontron COMe-cEL6 User Manual page 69

Sub-screen Next Level Sub-screens / Description
Thermal
Platform
Consideration>
Thermal
(continued) Configuration>
Sub-screen Next Level Sub-screens / Description
Platform HID Event Filter
Settings> driver>
System Time and
Alarm Source>
Intel® Trusted
Device Setup
Boot>
Sub-screen Next Level Sub-screens / Description
ACPI D3Cold ACPI D3Cold
Settings> Support>
VR Ramp up
Delay>
PCIE Slot 5
Device Power-
On-Delay in ms>
Audio Delay>
SensorHub>
TouchPad>
TouchPanel>
P-State Capping>
USB Port 1>
www.kontron.com
Critical Trip Controls temperature of ACPI Critical Trip Point, at
Point> which OS shuts down the system. Note: 119 C is the
PLAN of Record (POR) for all Intel mobile
processors.
[15 C , 23 C, 31 C................119 C (POR), 127 C, 130 C]
Critical trip [Enabled, Disabled]
Points>
PCH Temp [Enabled, Disabled]
Read>
CPU Energy [Enabled, Disabled]
Read>
CPU Temp [Enabled, Disabled]
Read>
Alert Enable Locks all Alert enable settings.
Lock>
[Enabled, Disabled]
CPU Temp> Fail safe temp that EC uses if OS hangs [72]
CPU Fan Fan speed EC uses is OS hangs [65]
Speed>
Enable or disable the HID event filter driver interface to OS
[Enabled, Disabled]
Selects source of system time and alarm functions
[ACPI Time and Alarm Device, Legacy RTC]
Enable or disable Intel® trusted setup boot on the next boot.
[Enabled, Disabled]
[Enabled, Disabled]
Delay between subsequent VR ramp ups if they are all turned on at
the same time [16]
Delay between applying core power and deasserting PERST# [100]
Delay after applying power to HD Audio (REALtek) codec device. [200]
Delay after applying power to sensor hub [68]
Delay after applying power to touchpad device [68]
Delay after applying power to touch panel device [68]
Set _PPC and send ACPI notification
[Enabled, Disabled]
USB RTD3 support for super speed USB 3.1 and high speed USB 2.0
devices
[Enabled, Disabled]
COMe-cEL6 - User Guide, Rev.1.2
// 69