Kontron COMe-cEL6 User Manual page 63

Sub-screen Next Level Sub-screens / Description
RC ACPI
Wake System
Settings>
from S5 via RTC>
(continued)
Low Power S0
Idle Capability>
PCI Delay
Optimization>
MSI Enable>
Sub-screen Next level Sub-Screens / Description
CPU Read only field
Configuration>
CPU Configuration: Type, IS, Speed, L1 Data Cache, L1 Instruction Cache, L2 Cache, L3 cache,
L4 Cache, VMX, SMX/TXT
CPU Flex Ratio
Override>
CPU Flex Ratio
Setting>
Hardware
Prefetcher>
Adjacent Cache
Line Prefetch>
Intel (VMX)
Virtualization
Technology>
Active
Processor
Cores>
BIST>
AP Threads Idle
Manner>
AES>
Machine Check>
Monitor MWait>
CPU SMM
Enhancement>
www.kontron.com
System wake on alarm event. When enabled system will wake on the
hr:min::sec::specified
[Enabled, Disabled]
Determines If ACPI Lower power S0 idle capability (mutually exclusive
with smart Connect). While enabled 8254 timer is disabled for SLP_S0
support.
[Enabled, Disabled]
Experimental ACPI additions for FW latency optimization
[Enabled, Disabled
MSI support is disables in FADT
[Enabled, Disabled]
CPU flex ration programming
[Enabled, Disabled]
Read only field
CPU Flex Ratio setting
[18]
Turns on/OFF the MLC streamer prefetcher
[Enabled, Disabled]
Turns on/OFF prefetching of adjacent cache lines
[Enabled, Disabled]
When enabled VMM can utilize the additional hardware capabilities
provided by Vanderpool Technology.
[Enabled, Disabled]
Number of core to enable in each processor package
[ALL, 1, 2,3]
Built-In Self test (BIST on reset)
[Enabled, Disabled]
AP threads idle manner for waiting signal to run
[HALT loop, MWAIT Loop, RUN loop]
Advanced Encryption Standard
[Enabled, Disabled]
Machine Check
[Enabled, Disabled]
Monitor MWait
[Enabled, Disabled]
SMM use Delay
Indication>
SMM use Block
Indication>
SMM use SMM en-US
Indication>
COMe-cEL6 - User Guide, Rev.1.2
Uses of SMM_Delay MSR for MP sync in SMI
[Enabled, Disabled]
Use of SMM_Blocked MSR for MP sync in SMI
[Enabled, Disabled]
Uses of SMM_Enable MSR for MP sync in SMI
[Enabled, Disabled]
// 63