Kontron COMe-cEL6 User Manual page 66

Sub-screen Next Level Sub-screens / Description
CPU Power
Power and
Perfomance> Management>
(continued) (continued)
www.kontron.com
IO MWait Enable: mapa IO read instructions sent to IO
Redirection> registers PMG_IO_BASE_ADDRBASE+off set to
MWait (offset)
[Enabled, Disabled]
Package Maximum c-state limit setting.
C-State Limit> CPU Default: leaves factory default
Auto: initializes to deepest available c state limit
[C0/C1, C2, C3, C6, C7, C8, C9, C10, CPU Default, Auto]
C6/C7 Short Latency Control (MSR 0x60B)
Time Unit> Unit of measurement for IRTL value bits [12:10)
[1ns, 32ns, 1024ns, 32768ns, 1048576ns,
33554432ns]
Latency> Interrupt response time limit value bits [9:0]
Enter 0 to 1023. [0]
C6/C7 Long latency Control (MSR 0x60C)
Time Unit> Unit of measurement for IRTL value bits [12:10].
[1ns, 32ns, 1024ns, 32768ns, 1048576ns,
33554432ns]
Latency> Interrupt response time limit value- bits [9:0]
Enter 0 to 1023. [0]
C8 Latency Control (MSR 0x633)
Time Unit> Unit of measurement for IRTL value bits [12:10)
[1ns, 32ns, 1024ns, 32768ns, 1048576ns,
33554432ns]
Latency> Interrupt response time limit value- bits [9:0]
Enter 0 to 1023. [0]
C9 Latency Control (MSR 0x634)
Time Unit> Unit of measurement for IRTL value bits [12:10)
[1ns, 32ns, 1024ns, 32768ns, 1048576ns,
33554432ns]
Latency> Interrupt response time limit value- bits [9:0]
Enter 0 to 1023. [0]
C10 Latency Control (MSR 0x635)
Time Unit> Unit of measurement for IRTL value bits [12:10)
[1ns, 32ns, 1024ns, 32768ns, 1048576ns,
33554432ns]
Latency> Interrupt response time limit value bits [9:0]
Enter 0 to 1023.[0]
Thermal Enable or disable the thermal monitor
Monitor>
[Enabled, Disabled]
Interrupt Selects the logical interrupts
redirection
[Fixed Priority, Round Robin, Hash vector, No
Mode
Change]
Selection>
Timed MWAIT> Enable or disables the timed MWait support
[Enabled, Disabled]
COMe-cEL6 - User Guide, Rev.1.2
// 66