Platform Control Indicator Panel - JLG 1200SJP Operation And Safety Manual

Platform Control Indicator Panel

(See Figure 3-5.)
1. System Distress Indicator
The light indicates that the JLG Control System
has detected an abnormal condition and a
Diagnostic Trouble Code has been set in the
system memory. Refer to the Service Manual for instructions
concerning the trouble codes and trouble code retrieval.
2.
Drive Orientation Indicator
When the boom is swung beyond the rear
drive tires or further in either direction, the
Drive Orientation indicator will illuminate
when the drive function is selected. This is a signal for the
operator to verify that the drive control is being operated in
the proper direction (i.e. controls reversed situations).
31215054
SECTION 3 - MACHINE CONTROLS AND INDICATORS
3. Capacity Zone Indicator
Indicates the maximum platform capacity
zone for the current position of the platform.
Restricted capacities
restricted platform positions (shorter boom
lengths and higher boom angles).
NOTE:
Refer to the capacity decals on the machine for restricted and
unrestricted platform capacities.
4. Tilt Warning Light and Alarm
This red illuminator indicates that the chassis is
on a slope. If the boom is above horizontal and
the machine is on a slope, the tilt alarm warn-
ing light will illuminate, an alarm will sound, available func-
tions are placed in CREEP speed, and drive is cut out in
direction of travel. Drive in the opposite direction may be
allowed under certain conditions.
Tilt Angle
5°
are permitted at
Market
All Markets
3-19