JLG 1200SJP Operation And Safety Manual page 54

SECTION 3 - MACHINE CONTROLS AND INDICATORS
NOTE: The Jib Swing function is not operable when the Capacity Select
control is in the 1000 lb (454 kg for ANSI markets and 450 kg for
CE and Australia markets) position.
17.
Jib Swing
This switch allows the operator to rotate the jib to the left or
right.
18.
Soft Touch/SkyGuard Indicator
Indicates the Soft Touch bumper is against an object or the
SkyGuard sensor has been activated. All controls are cut out
until the override button is pushed. For Soft Touch, controls
are then active in the Creep Mode or for SkyGuard, controls
will work normally.
19.
Platform Rotate
Allows the operator to rotate the platform to
the left or right.
3-16
20. Jib Stow
Allows the jib to be returned to the stowed
position for transport and also taken out of
the transport position for machine usage.
This control operates both jib swing and the
jib lock pin in a coordinated manner.
21.
Function Speed Control
This control affects the speed of Main
Boom Telescope, Jib Telescope, and Jib
Lift. Turning the knob all the way coun-
terclockwise until it clicks puts Drive,
Main Lift, Platform Rotate, and Swing
into Creep mode.
31215054