Accessory Ratings; Safety Precautions - JLG 1200SJP Operation And Safety Manual

SECTION 6 - ACCESSORIES

Accessory Ratings

Welding Mode Input Power
3- phase
Stick (SMAW)
TIG (GTAW)
1 -phase

Safety Precautions

DO NOT OVERLOAD PLATFORM.
DE-RATE THE PLATFORM BY 70 LB (32 KG) WHEN WELDER IS IN THE PLATFORM.
6-12
Welding
Rated Output Amperage
Range
280 Amp at 31.2 V,
35% Duty Cycle
5-250 A
200 Amp at 28 V,
100% Duty Cycle
200 Amp at 28 V,
50% Duty Cycle
5-200 A
150 Amp at 28 V,
100% Duty Cycle
Amps Input At Rated Load Output (50/60 Hz)
Maximum Open
Circuit Voltage
230 V 460 V
32
79 VDC
20
35 ------
79 VDC
34 ------
• Check for cracked welds and damage to welder supports.
• Check for proper and secure installation of welder and
bracket.
• Ensure no personnel are beneath platform.
• Do not exit platform over rails or stand on rails.
• Use this option only on approved models.
• Keep lanyard attached at all times.
• Ensure correct polarity of leads.
• Wear proper welding apparel.
575 V kVa
17 13 15.7
11 8 10.3
------ 9.8
------ 6.9
kW
10
6.4
6.5
4.4
31215054