Safety Precautions; Preparation And Inspection; Operation - JLG 1200SJP Operation And Safety Manual

SECTION 6 - ACCESSORIES

Safety Precautions

ENSURE PANEL IS SECURED WITH STRAP.
DO NOT OVERLOAD TRAY OR PLATFORM. TOTAL MACHINE CAPACITY IS REDUCED
WHEN TRAY IS INSTALLED.
™
WITH SKYGLAZIER INSTALLED, THE ORIGINAL PLATFORM CAPACITY RATINGS ARE
REDUCED AS SPECIFIED IN THE CAPACITY SPECIFICATIONS TABLE. DO NOT EXCEED
NEW PLATFORM CAPACITY RATINGS. REFER TO CAPACITY DECAL LOCATED ON TRAY.
AN INCREASE OF THE AREA EXPOSED TO THE WIND WILL DECREASE STABILITY. LIMIT
PANEL AREA TO 32 SQ FT (3 SQ M).
• Ensure no personnel are beneath platform.
• Do not exit platform over rails or stand on rails.
• Remove tray when not in use.
• Use this option only on approved models.
6-8

Preparation and Inspection

• Check for cracked welds and damage to tray.
• Ensure tray is properly secured to platform.
• Ensure strap is not torn or frayed.

Operation

1.
Load SkyGlazier™ tray with panel.
2.
Route the adjustable strap around the panel and tighten
until secure.
3.
Position panel to its desired location.
31215054