JLG 1200SJP Operation And Safety Manual page 44

SECTION 3 - MACHINE CONTROLS AND INDICATORS
9. Engine Start/Auxiliary Power Switch
To start the engine, the switch must be held Up
until the engine starts.
To use auxiliary power, the switch must be held
Down for duration of auxiliary pump use. Aux
power can only be used if the engine is not run-
ning.
10. Jib Lift
Provides raising and lower-
ing of the jib.
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR SLIGHT LEVELING OF
THE PLATFORM. INCORRECT USE COULD CAUSE THE LOAD/OCCUPANTS TO SHIFT OR
FALL. FAILURE TO DO SO COULD RESULT IN DEATH OR SERIOUS INJURY.
3-6
11. Platform Leveling Override
A three position switch
allows the operator to adjust
the automatic self leveling
system. This switch is used to
adjust platform level in situa-
tions such as ascending/
descending a grade.
12.
Platform Rotate
Provides rotation of the
platform.
13. Jib Rotate
A three position switch per-
mits rotation of the jib and
platform.
31215054