1. Indicator panel
NOTE: The indicator panel uses different shaped symbols to alert
the operator to different types of operational situations
that could arise. The definition of those symbols are
explained below.
Indicates a potentially hazardous situation,
which if not corrected, could result in serious
injury or death. This indicator will be red.
Indicates an abnormal operating condition,
which if not corrected, may result in machine
interruption or damage. This indicator will be
yellow.
Indicates important information regarding the
operating condition, i.e. procedures essential
for safe operation. This indicator will be green.
31210162
SECTION 3 – MACHINE CONTROLS AND INDICATORS
Figure 3-7. Platform Control Indicator Panel
a- Control Enable Indicator
b- Creep Speed Indicator
c- System Distress Indicator
d- Drive Orientation Indicator
e- Tilt Indicator Warning Light
f- Overload Indicator Warning Light (if equipped)
g- Slack Chain Indicator Warning Light
h- Battery Discharge Indicator (BDI)
i- Soft Touch Indicator (If equipped)
j- Opening Gate Warning Light (XL Basket Only)
– JLG Lift –
3-11