Operator Responsibility; 2.2 Preparation, Inspection, And Maintenance - JLG 1200SJP Operation And Safety Manual

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION

Operator Responsibility

The operator must be instructed that they have the responsibility
and authority to shut down the machine in case of a malfunction
or other unsafe condition of either the machine or the job site.
Machine Familiarization
NOTE:
Responsibilities for familiarization may vary by region.
Only properly trained personnel who have received unit-specific
familiarization shall operate a MEWP. The user shall determine if
personnel are qualified to operate the MEWP prior to operation.
The user shall ensure that after familiarization, the operator
operates the MEWP for a sufficient period of time to achieve
proficiency. When authorized by the user, self-familiarization can
be achieved, if authorized, by a properly trained operator
reading, understanding and following the manufacturer's
operator's manual.
Prior to users authorization of an operator to use a specific model
of MEWP, the user shall ensure the operator is familiarized on the
following:
1.
Location of the manual storage compartment and the
requirement to ensure the required manual(s) are present on
the MEWP;
2. Purpose and function of the machine controls and indicators
at the platform and ground control stations;
2-2
3. Purpose, location, and function of the emergency controls;
4. Operating characteristics and limitations;
5. Features and devices;
6.
Accessories and optional equipment.

2.2 PREPARATION, INSPECTION, AND MAINTENANCE

The following table covers machine inspections and mainte-
nance required by JLG Industries, Inc. Consult local regulations for
further requirements for MEWPs. The frequency of inspections
and maintenance must be increased as necessary when the
machine is used in a harsh or hostile environment, if the machine
is used with increased frequency, or if the machine is used in a
severe manner.
31215054