JLG 1200SJP Operation And Safety Manual page 53

NOTE: To operate the Drive Joystick, pull up on the lock-
ing ring below the handle.
NOTE:
The DRIVE control levers are spring-loaded and will automati-
cally return to neutral (OFF) position when released.
12. Drive/Steer
Push forward to drive forward,
pull back to drive in reverse.
Steering is accomplished via a
thumb-activated rocker switch on
the end of the steer handle.
13.
Main Telescope
Provides extension and retraction of the main
boom.
31215054
SECTION 3 - MACHINE CONTROLS AND INDICATORS
14. Lights (If Equipped)
Operates accessory light packages if the
machine is so equipped.
15.
Jib Lift
Provides raising and lowering of the jib.
16.
Soft Touch/SkyGuard Override Switch
For machines equipped with SkyGuard:
The SkyGuard override switch enables
functions cut out by the Skyguard sys-
tem to be operated again, allowing the
operator to resume use of machine
functions.
For machines equipped with both SkyGuard and Soft Touch:
The switch operates like the SkyGuard
override switch as described above.
The switch also enables the functions
cut out by the Soft Touch system to
operate again at creep speed, allowing the operator to move
the platform away from the obstacle that caused the shut-
down situation.
3-15