Platform Control Indicator Panel - JLG 1250AJP Operation And Safety Manual

20. Axle Extend/Retract
Allows the operator to extend or retract the axles. The axles
can only be extended or retracted while the machine is
being driven forward or reverse.
21. Horn
If pressed, this switch supplies power to the horn.
22. Indicator Panel
The LED Indicator Panel contains indicator lights that signal
problem conditions or functions operating during machine
operation.
3121170
SECTION 3 - MACHINE CONTROLS AND INDICATORS

Platform Control Indicator Panel

(See Figure 3-5., Platform Control Indicator Panel)
1. Level System Fault Indicator
Indicates a fault in the electronic leveling system. The fault
indicator will flash and an alarm sound. All functions will
default to creep if the boom is out of transport mode.
IF THE LEVEL SYSTEM FAULT INDICATOR IS ILLUMINATED, SHUT DOWN THE
MACHINE, RESET THE EMERGENCY STOP, AND RESTART THE MACHINE. IF THE FAULT
PERSISTS, RETURN THE PLATFORM TO THE STOWED POSITION, USING MANUAL LEV-
ELING AS REQUIRED, AND HAVE LEVELING SYSTEM REPAIRED.
2. AC Generator (If Equipped)
Indicates the generator is in operation.
3. Platform Overload Indicator (If Equipped)
Indicates the platform has been overloaded.
3-15