Ground Control Station - JLG 1200SJP Operation And Safety Manual

SECTION 3 - MACHINE CONTROLS AND INDICATORS
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF OR NEUTRAL POSITION WHEN RELEASED.

Ground Control Station

See Figure 3-1., Ground Control Station) and Figure 3-2., Ground Control
Station with Machine Safety System Override (MSSO) (CE Only).
1. Indicator Panel
The LED Indicator Panel contains indicator lights that signal
problem conditions or functions operating during machine
operation.
2.
Boom Control System Test Button
The push button is used to test the
boom control system and confirm
that it is working properly.
3-4
3. Main Boom Telescope
Provides extension
retraction of the main boom.
4.
Swing
Provides 360 degrees continu-
ous turntable rotation.
5.
Main Boom Lift
Provides raising and lowering
of the main boom.
NOTE:
With Platform/Ground Select switch in the center position,
power is shut off to controls at both operating stations.
and
31215054