JLG 1200SJP Operation And Safety Manual page 34

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
Walk-Around Inspection
Begin the Walk-Around Inspection at Item 1, as noted on the dia-
gram. Continue checking each item in sequence for the condi-
tions listed in the following checklist.
TO AVOID POSSIBLE INJURY, BE SURE MACHINE POWER IS OFF. DO NOT OPERATE
MACHINE UNTIL ALL MALFUNCTIONS HAVE BEEN CORRECTED.
DO NOT OVERLOOK VISUAL INSPECTION OF CHASSIS UNDERSIDE. CHECKING THIS
AREA MAY RESULT IN DISCOVERY OF CONDITIONS WHICH COULD CAUSE EXTENSIVE
MACHINE DAMAGE.
INSPECTION NOTE: On all components, make sure there are no
loose or missing parts, that they are securely fastened, and no vis-
ible damage, leaks or excessive wear exists in addition to any
other criteria mentioned.
1. Platform Assembly and Gate - Footswitch works properly,
not modified, disabled or blocked. Latch, stop, and hinges in
working condition.
2. SkyGuard - See Inspection Note.
2-8
3. Platform Control Console - Switches and levers return to
neutral when activated and released, decals/placards secure
and legible, control markings legible.
4. Platform Rotator - See Inspection Note.
5. All Hydraulic Cylinders - No visible damage; pivot pins and
hydraulic hoses undamaged, not leaking.
6. Jib Rotator - See Inspection Note.
7. Boom Sections/Uprights/Turntable - See Inspection Note.
8. Wheel/Tire Assemblies - Properly secured, no missing lug
nuts. Inspect for worn tread, cuts, tears or other discrepan-
cies. Inspect wheels for damage and corrosion.
9. Drive Motor, Brake, and Hub - No evidence of leakage.
10. Steering Spindles and Sensors - See Inspection Note.
11. Hood Assemblies - See Inspection Note.
12. Turntable Bearing - Evidence of proper lubrication. No evi-
dence of loose bolts or looseness between bearing and
machine.
13. Swing Drive - No evidence of damage.
14. Main Hydraulic Pump - See Inspection Note.
15. Air Shutoff Valve (ASOV) (If Equipped) - See Inspection
Note.
31215054