Steering; Extending The Axles; Platform; Platform Level Adjustment - JLG 1200SJP Operation And Safety Manual

4.5

STEERING

Position thumb switch on Drive/Steer controller to RIGHT for
steering right, or to LEFT for steering left.
4.6

EXTENDING THE AXLES

NOTE: The operator must be driving the machine (forward or reverse) in
order to extend the axles.
Position the Axle Extend switch to extend the axles or to retract
to retract the axles.
4.7

PLATFORM

Platform Level Adjustment

ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR SLIGHT LEVELING OF
THE PLATFORM. INCORRECT USE COULD CAUSE THE LOAD/OCCUPANTS TO SHIFT OR
FALL. FAILURE TO DO SO COULD RESULT IN DEATH OR SERIOUS INJURY.
31215054
SECTION 4 - MACHINE OPERATION
NOTE: When the Boom Control Select Switch is in the Manual mode,
Platform leveling only functions during Main Lift operation.
When the Boom Control Select Switch is in the Automatic mode,
Platform Leveling is active during all functions except during
telescope operation. Also, when in the Manual mode, the Con-
trolled Angle system is not active.
During normal operation of the machine, the platform will auto-
matically maintain it's position. To manually Level Up or Down -
Position the Platform/Level control switch Up or Down and hold
until the desired platform position is obtained.

Platform Rotation

To rotate the platform to the left or right, use the Platform Rotate
control switch to select the direction and hold until desired posi-
tion is reached.
4-13