Traveling (Driving) - JLG 1200SJP Operation And Safety Manual

4.4

TRAVELING (DRIVING)

NOTE: Refer to the Operating Specifications table for Gradeability and
Sideslope ratings.
All ratings for Gradeability and Sideslope are based upon the
machine's boom being in the stowed position, fully lowered, and
retracted.
Traveling is limited by two factors:
1.
Gradeability, which is the percent of grade of the incline the
machine can climb.
2.
Sideslope, which is the angle of the slope the machine can
be driven across.
NOTE:
When the upper boom is raised approximately 15 degrees above
horizontal, the high drive function will automatically be in low
drive.
31215054
SECTION 4 - MACHINE OPERATION
DO NOT DRIVE WITH BOOM ABOVE HORIZONTAL EXCEPT ON A SMOOTH, FIRM AND
LEVEL SURFACE WITHIN THE LIMITS OF THE MAXIMUM OPERATING SLOPE.
TO AVOID LOSS OF TRAVEL CONTROL OR TIP OVER, DO NOT DRIVE MACHINE ON
GRADES EXCEEDING THOSE SPECIFIED IN THE OPERATING SPECIFICATIONS SECTION
OF THIS MANUAL.
DO NOT DRIVE ON SIDESLOPES WHICH EXCEED 5 DEGREES.
USE EXTREME CAUTION WHEN DRIVING IN REVERSE AND AT ALL TIMES WHEN DRIV-
ING WITH THE PLATFORM ELEVATED.
BEFORE DRIVING, LOCATE THE BLACK/WHITE ORIENTATION ARROWS ON BOTH THE
CHASSIS AND THE PLATFORM CONTROLS. MOVE THE DRIVE CONTROLS IN A DIREC-
TION MATCHING THE DIRECTIONAL ARROWS FOR THE INTENDED DIRECTION OF
TRAVEL.
4-11