Supplemental Information; Wheel Torque Chart - JLG 1200SJP Operation And Safety Manual

SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
Table 7-16. Wheel Torque Chart
TORQUE SEQUENCE
1st Stage
45 ft. lbs.
(60 Nm)
4.
Wheel nuts should be torqued before first road use and after
each wheel removal. Check and torque every 3 months or
150 hours of operation.
7-30
2nd Stage 3rd Stage
100 ft. lbs. 180 ft. lbs.
(140 Nm) (252 Nm)
7.5

SUPPLEMENTAL INFORMATION

The following information is provided in accordance with the
requirements of the European Machinery Directive 2006/42/EC
and is only applicable to CE machines.
For electric powered machines, the equivalent continuous A-
Weighted sound pressure level at the work platform is less than
70dB(A)
For combustion engine powered machines, guaranteed Sound
Power Level (LWA) per European Directive 2000/14/EC (Noise
Emission in the Environment by Equipment for Use Outdoors)
based on test methods in accordance with Annex III, Part B,
Method 1 and 0 of the directive, is 106 dB or 110dB, depending
upon engine options.
The vibration total value to which the hand-arm system is sub-
jected does not exceed 2,5 m/s
value of weighted acceleration to which the whole body is sub-
jected does not exceed 0,5 m/s
2
. The highest root mean square
2
.
31215054