Command Prompt; Reserved Words; Show Cli Command - HP StorageWorks SR2122 User Manual

Configuring the Storage Router
■
Passwords for Monitor and Administrator mode can be initially configured
through the Setup Configuration Wizard (see
Wizard" on page 89). The factory default password for both modes is hp.
Note:
router in the cluster, will be shared with any other storage router that joins the cluster.

Command Prompt

The CLI command prompt includes the storage router system name. An asterisk
( * ) appears at the beginning of the prompt if the system configuration has been
modified but not saved.

Reserved Words

Reserved words cannot be used as values or names in CLI commands. Words that
are used as commands or as keywords in commands are reserved words. The
following are additional reserved words in the CLI.
■
■
■
■
■

Show CLI Command

Use the show cli command to display the complete CLI command syntax tree,
along with helpful information about command parameters and arguments. Only
valid commands will display for the current command mode of your IP Storage
Router.
92
Administrator mode allows the user to configure and actively manage the
storage router, its access lists and SCSI routing instances, and the storage
router cluster.
Passwords are shared cluster-wide and when configured on the first storage
acl
canonical
iprouter
iptan
loglevel
"Running the Setup Configuration
IP Storage Router SR2122-2 User Guide