Restoring An Access List - HP StorageWorks SR2122 User Manual

Maintaining and Managing the Storage Router

Restoring an Access List

When you restore an access list, existing entries are never deleted. The restore will
add missing entries and overwrite entries of the same name, but will never purge
or delete existing entries. If necessary, you can delete an entire access list and then
restore if from a saved configuration file.
Use the following procedure to restore the access list, mylist1, from the file,
accesslist_backup.xml. In this example, mylist1 in the running
configuration contains the following entries:
■
■
■
■
The saved access list in the configuration file, accesslist_backup.xml,
contains these entries:
■
■
■
■
Note:
single storage router. If you issue an access list command from a storage router
that is not performing access list management functions, the CLI displays an
informational message with the name of the storage router that is currently handling
those functions.
1. enable — Enter Administrator mode.
2. show accesslist mylist1 — Display the current entries associated
3. show accesslist mylist1 from accesslist_backup.xml
178
10.1.1.30/32
172.16.255.220/32
chap-username 12h7b.lab2.webservices
chap-username 12784.lab1.webservices
209.165.200.225/32
10.1.1.30/32
chap-username 12h7b.lab2.webservices
chap-username test2.sys3
In a cluster environment, access lists management functions are handled by a
with access list, mylist1.
— Display the entries associated with access list, mylist1, saved in the
configuration file, accesslist_backup.xml. The configuration file
must exist in the savedconfig directory.
IP Storage Router SR2122-2 User Guide