Installing Sfp Modules; Securing The Rear Of The Rails - HP StorageWorks SR2122 User Manual

Figure 12: Securing the rear of the rails

Installing SFP Modules

Before installing or removing an SFP (small form-factor pluggable) module, read
the installation information in this section. For connecting to SFP modules in the
Gigabit Ethernet ports and the Fibre Channel ports, read the instructions in the
"Connecting to Gigabit Ethernet and Fibre Channel
Note:
third-party vendors. See
specifications.
Note:
from each other, place dust covers on them.
IP Storage Router SR2122-2 User Guide
3
Because of interoperability issues, HP does not support SFPs purchased from
Chapter B, "Cable and Port Pinouts"
When fiber-optic cable plugs and SFP module receptacles are disconnected
2
1
Ports" section.
for SFP port
Installation
33