Apply passwords to EIA/TIA-232 console interface (yes/no)
System administrator name
System administrator e-mail address
System administrator phone number
System administrator pager number
Name of SCSI routing instance (if using the VLAN service, do not configure a
SCSI routing instance with the setup configuration wizard)
Configuration deployment option (1 or 2)
Management interface IP address and subnet mask
Connecting a Console
To begin configuration of your IP Storage Router 2122-2, use the command line
interface (CLI), by connecting a PC with a terminal emulation program to the
EIA/TIA-232 console interface according to the procedures in
"Installation."
for a CLI session with the values provided in
Table 11: Terminal Emulation Configuration
Data bits
Bit per second
Parity
Stop bits
Flow control
IP Storage Router SR2122-2 User Guide
Configuration Item
Then make sure that the terminal emulation program is configured
Setting
Configuring the Storage Router
Table
11.
Value
8
9600
None
1
None
Value
Chapter 2,
87