Verifying And Saving Configuration - HP StorageWorks SR2122 User Manual

Configuring FCIP

Verifying and Saving Configuration

Verify the FCIP configuration using the procedures that follow. You can save the
configuration at any time by using the save all bootconfig command.
You must save the running configuration to the bootable configuration for it to be
retained in the storage router when it is rebooted. Once you have saved the
configuration, you can verify that the configuration to be used when the storage
router is rebooted matches the currently running configuration.
To verify FCIP configuration:
1. enable — Enter Administrator mode.
2. show fcip fcip1 — Displays the operational and connection
Example 10: Verifying Existence of an FCIP instance for a TCP server
[SR2122-2local]# show fcip fcip1
Instance
--------
fcip1
Description
-----------
Access to SAN island 5
Destination
-----------
fcip
LinkState
---------
UP
fcip1 Trace Status
------------------
pktTracing
mboxTracing
mboxCmdCount
142
information for FCIP instance fcip1. See
Example 11 for a TCP client.
Device I/F
----------
fc1
LocalMode
---------
tcpserver
Example 10
Network I/F
-----------
ge1 10.0.0.24
IpAddress
---------------
10.0.0.25
On, mask 0xffff
On
0
IP Storage Router SR2122-2 User Guide
for a TCP server and
IsConnected
-----------
TRUE