Target-Only Mapping Using Wwpn Addressing; Configuring An Access List - HP StorageWorks SR2122 User Manual

3. SCSIRouter zeus target pegasus_web LUN 3 serial

Target-only mapping using WWPN addressing

To map iSCSI targets to storage devices by physical storage address:
1. enable — Enter Administration mode.
2. SCSIRouter zeus target pegasus_email WWPN
To map iSCSI targets to storage devices by index numbers:
1. enable — Enter Administration mode.
2. SCSIRouter zeus target pegasus_email WWPN #? — Specify
3. SCSIRouter zeus target pegasus_email WWPN #2 — Choose

Configuring an Access List

Configuring an access list consists of creating an access list by naming it and
identifying the IP hosts that have permission to access storage devices via iSCSI
target names. IP hosts can be identified by:
■
■
■
IP Storage Router SR2122-2 User Guide
number #6 — Choose a physical address designated by an index number
(see index number 6 in
LUN 3 combination to the desired physical address serial number
LS093221000019451JM5.
22:00:00:20:37:19:12:da — Specify desired SCSI routing instance
zeus. Specify iSCSI target pegasus_email, and map it to the desired physical
address WWPN 22:00:00:20:37:19:12:da and any LUNs available as part
of that WWPN.
desired SCSI routing instance zeus. Specify iSCSI target pegasus_email and
prompt for an indexed list of available storage addresses using the number
sign and a question mark #?.
a physical address designated by an index number (see index number 2 in
6) to map the iSCSI target pegasus_email to the desired physical
Example
address WWPN 22:00:00:20:37:19:12:da.
IP address
CHAP user name (used for iSCSI authentication)
iSCSI name of the IP host — The iSCSI name is a UTF-8 character string
based on iSCSI functional requirements. It is a location-independent
permanent identifier for an iSCSI node, and is generated when a target is
initially created.
6) to map the iSCSI target pegasus_web and
Example
Configuring SCSI Routing
129