HP StorageWorks SR2122 User Manual page 164

Configuring a High Availability Cluster
3. If you are going to retain data, determine if you have any duplicate SCSI
4. If you are going to retain data, determine if you need to save existing access
5. Use the Setup Cluster Configuration Wizard to join the new cluster.
6. Perform any additional configuration that may be needed. You can fail over
7. Use the save all command with the bootconfig keyword to copy and save
164
routing instance names. When the storage router is added to the cluster, the
data in the cluster will overwrite the existing data. You may prefer to change
the configuration in the storage router before it joins the cluster to prevent this
situation.
list information. Access lists are not retained. Any access lists on the storage
router will be discarded when it joins the new cluster. You can save the access
list information and then restore it to the cluster. Access list information can
be restored before or after the storage router joins the cluster by transferring
the saved configuration file to the first storage router in the cluster and
performing the restore.
Respond to the prompts to retain or delete configuration as required. The
storage router will automatically reboot at the end of the configuration wizard.
SCSI routing instances to this new cluster member to balance traffic load
between all storage routers in the cluster.
the storage router configuration, thereby updating the cluster.
IP Storage Router SR2122-2 User Guide