Using Http; Using Proxy Services - HP StorageWorks SR2122 User Manual

To make a new version of software available to the storage router:
■
■
■

Using HTTP

To make a new version of software available to the storage router via HTTP:
1. enable — Enter Administrator mode.
2. show software version all — Verify that there is only one version
3. download software http version 3.1.3 — Download a new
Note:
storage router, for example, under the guidance of a HP Technical Support
professional. If you isolate this software from standard updates by placing it in another
location (not the default download location), you could change the default download
location, download the software, and then reset the default download location. An
easier way, however, is to specify the download location via the URL parameter on the
download software http command. For example, to download a file named
313.tar containing version 3.1.3 software from
http://your.website.com/StorageRouter, issue this command:
download software http url http://your.website.com/
StorageRouter/313.tar.

Using Proxy Services

To make a new version of software available to the storage router via proxy
services:
1. enable — Enter Administrator mode.
2. show software version all — Verify that there is only one version
3. download software proxy version 3.1.3 — Make a new
IP Storage Router SR2122-2 User Guide
Using HTTP
Using Proxy Services
Using TFTP
of software on the storage router. If two versions exist, use the
delete software version command to delete the old version of
software to make room for the new version.
software version to the storage router (for example, 3.1.3).
There may be times when you need to make special software available to the
of software on the storage router. If two versions exist, use the
delete software version command to delete the old version of
software to make room for the new version.
software version available to the storage router (for example, 3.1.3).
Maintaining and Managing the Storage Router
171