Configuring Time And Date - HP StorageWorks SR2122 User Manual

Configuring Time and Date

Configuring time and date parameters consists of specifying the time, date, time
zone, and time server. To configure the time and date parameters:
1. enable — Enter Administrator mode.
2. clock timezone US/Pacific — Identify the time zone where the
3. clock set 08:20:00 04 15 2002 — Set time and date (for example:
4. ntp peer 10.1.60.86 — (Optional) Specify the name or IP address of
Note:
syslog and devlog timestamps.
IP Storage Router SR2122-2 User Guide
storage router is located. If a time zone is not identified, time is assumed to be
GMT.
time, 8:20 a.m.; date, April 14, 2002).
the network time protocol (NTP) server with which the storage router will
synchronize the date and time.
After a time change, a reboot is required to synchronize the internal FC switch
Configuring System Parameters
101