Access Denied To All Iscsi Targets; Verifying And Saving Configuration - HP StorageWorks SR2122 User Manual

Configuring SCSI Routing

Access denied to all iSCSI targets

To deny access by all IP hosts to all iSCSI targets at once:
1. enable — Enter Administration mode.
2. SCSIRouter zeus target all accesslist none — Specify

Verifying and Saving Configuration

Verify the access list configuration and the SCSI routing configuration using the
procedures that follow. You can save the configuration at any time by using the
save all bootconfig command. You must save the running configuration
to the bootable configuration for it to be retained in the storage router when it is
rebooted. Once you have saved the configuration, you can verify that the
configuration to be used when the storage router is rebooted matches the currently
running configuration.
To verify access list configuration:
1. enable — Enter Administration mode.
2. Show accesslist — Display a list of all existing access lists
3. Show accesslist aegis — Display the IP host identifies in an access
Example 7: Verifying Existence of an Access List
[SR2122]# show accesslist
aegis
hris-mgmt
Example 8: Verifying IP Addresses in an Access List Named aegis
[SR2122]# show accesslist aegis
accesslist aegis description "Access to zeus SCSI routing
service"
accesslist aegis 10.2.0.23/255.255.255.255
accesslist aegis 10.3.0.36/255.255.255.255
accesslist aegis 10.4.0.49/255.255.255.255
accesslist aegis chap-username 12h7b.lab2.webservices
134
that no IP hosts can access any iSCSI targets that were configured as part of
the specified SCSI routing instance zeus.
(Example 7).
list (Example 8).
IP Storage Router SR2122-2 User Guide