Connecting To A Gigabit Ethernet Port; Connecting To A Fibre Channel Port; Connecting To The 10/100 Ethernet Management And Ha Ports - HP StorageWorks SR2122 User Manual

Connecting to a Gigabit Ethernet Port

To connect a cable to a Gigabit Ethernet port:
1. Remove the dust cover from the SFP module in the Gigabit Ethernet port;
2. Remove the dust cover (or covers) from the plug on the cable; store the cover
3. Connect the other end of the cable to the external end system, switch, or

Connecting to a Fibre Channel Port

To connect a cable to a Fibre Channel port:
1. Remove the dust cover from the SFP module in the Fibre Channel SFP port;
2. Remove the dust covers from the cable plug on the fiber-optic cable; store the
3. Connect the other end of the cable to a Fibre Channel port of another system

Connecting to the 10/100 Ethernet Management and HA Ports

To connect to the 10/100 management and HA ports:
1. Use modular, RJ-45, straight-through UTP cables to connect the 10/100
2. Connect the appropriate modular cables to the 10/100 management and HA
IP Storage Router SR2122-2 User Guide
store the dust cover for future use.
(or covers) for future use. Insert the cable plug into the Gigabit Ethernet SFP
module.
router.
store the dust cover for future use.
dust covers for future use. Insert the cable plug into the Fibre Channel SFP
module.
(for example, a storage system, switch, host, or another storage router).
management and HA ports to end systems. Use modular, RJ-45 cross-connect
cables to connect to external switches and routers.
ports (see Figure 25).
Installation
43