Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Release Notes
hp StorageWorks
SR2122-2 IP Storage Router
Product Version: 3.4.5b
Fourth Edition (March 2005)
Part Number: AA-RV20C-TE
These release notes are for the HP StorageWorks SR2122-2 IP Storage Router running firmware version 3.4.5b
and provides important information not covered in other documentation.
For the latest version of these Release Notes and other IP storage router documentation, access the HP storage
web site at: http://www.hp.com/country/us/eng/prodserv/storage.html.
Advertisement
Table of Contents
Related Manuals for HP StorageWorks SR2122-2
Summary of Contents for HP StorageWorks SR2122-2
- Page 1 These release notes are for the HP StorageWorks SR2122-2 IP Storage Router running firmware version 3.4.5b and provides important information not covered in other documentation. For the latest version of these Release Notes and other IP storage router documentation, access the HP storage web site at: http://www.hp.com/country/us/eng/prodserv/storage.html.
- Page 2 Hewlett-Packard. The information contained in this document is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
- Page 3 HP StorageWorks SR2122-2 IP Storage Router User Guide ■ ■ HP StorageWorks SR2122-2 IP Storage Router Command Line Interface Reference Guide ■ HP StorageWorks SR2122-2 IP Storage Router Rack Mount Template HP StorageWorks SR2122-2 IP Storage Router Getting Started Guide (web only) ■...
-
Page 4: Overview
Overview Overview These release notes are for the HP Storageworks SR2122-2 IP Storage Router running firmware version 3.4.5b. This document provides important information that is not covered in other documentation. Important: Read this entire document before installing and configuring the HP Storageworks SR2122-2 IP Storage Router. -
Page 5: Identifying The Sr2122-2 Version Level
Identifying the SR2122-2 Version Level Identifying the SR2122-2 Version Level You can determine the SR2122-2 software version level by typing the following command at the SR2122-2 CLI prompt: [SR2122-2]# sho version The resulting display lists the software version level: Hewlett-Packard SR2122 Storage Router CLI Version: 2.1 iSCSI Version: 0/2 (Min/Max) System Bootstrap: 3.4.5b-K9... -
Page 6: Identifying The Hp-Ux Iscsi Software Initiator Version
Identifying the HP-UX iSCSI Software Initiator version Identifying the HP-UX iSCSI Software Initiator version To identify the HP-UX iSCSI Software Initiator driver version, enter the following command while logged in as root or superuser. root-> /usr/sbin/swlist iSCSI-00 Identifying the HP Windows iSCSI driver version level Open the “hp iSCSI Config”... -
Page 7: Identifying The Linux Red Hat Iscsi Driver Version Level
1. Go to the URL: 2. Click on HP-UX 11i operating environment 3. Click on "iSCSI Software Initiator" To view the latest Linux drivers for the HP SR2122-2 iSCSI router please refer to the following web site: http://sourceforge.net/projects/linux-iscsi For Microsoft’s iSCSI initiator driver, refer to the Microsoft website. -
Page 8: Hardware And Software Support
Microsoft Windows - All GbE NICS supported by HP for Windows ■ Red Hat Linux - All GbE NICS supported by HP for Red Hat Linux Operating system software support The following operating system software versions are supported with the SR2122-2 with iSCSI: ■... -
Page 9: Sr2122-2 Configuration Rules
Channel port (FC2) is not supported as a redundant SAN port for ■ FC1. Direct connect of the SR2122-2 Fibre Channel ports to any HP storage array is not ■ supported. The MSR2122 Management port must be in a different subnet than the SCSI Router ■... - Page 10 FCIP operations and is fixed in this release. ■ An SR2122-2 would “panic” when a standard MIB II polling engine, such as the HP OpenView Network Node Manager, attempted to SNMP poll the SR2122-2. SR2122-2 IP Storage Router Release Notes...
-
Page 11: Known Problems
For FCIP with C-Series switches, the SR2122-2 must be configured for useBport disabled if using MDS v2.01b or later switch FW. Refer to page 62 of the HP StorageWorks SR2122-2 IP Storage Router Getting Started Guide for more information. ISL loss can result when the SR2122-2 is configured as FCIP and used to extend B-series switches upgraded to firmware 3.2.x or 4.4.x... - Page 12 Configuration Tab in the SR2122-2 GUI or the SR2122-2 CLI command: Interface FC1 Topology ptp SR2122> iSCSI CRC support The iSCSI CRC feature is not supported with Windows 2000, Windows 2003, and Red Hat Linux. The iSCSI CRC feature is supported for HP-UX. SR2122-2 IP Storage Router Release Notes...