Configuring a High
Availability Cluster
This chapter explains how to configure SR2122-2 Storage Routers in a cluster to
allow the storage routers to back each other up in case of failure. The following
tasks are covered:
■
■
■
High availability clusters can be configured using CLI commands, as described in
this chapter, or via the web-based GUI. To access the web-based GUI, point your
browser to the storage router management interface IP address. After logging on,
click the Help link to access online help for the GUI.
IP Storage Router SR2122-2 User Guide
Prerequisite Tasks
Adding the Storage Router to a Cluster
Changing Clusters
11
157