Example 18: Verify Administrator Contact Information
[SR2122_PR1]# show admin
Administrator Contact Information
Powering Down the Storage Router
If you need to make changes to the physical location or cabling of the storage
router, you may need to schedule a time to power down the unit. Use the following
procedure to properly power down a storage router. These steps assure that the file
system is in the appropriate state prior to shutdown.
1. enable — Enter Administrator mode.
2. halt — Assure that all configuration information is saved. Respond to any
Resetting the System
There may be times when you need to return some or all of the storage router
configurations to factory defaults, for example, when moving a system between
environments (such as test and production) or for troubleshooting purposes.
To reset the storage router:
1. Save existing configuration information to a file. (Optional)
2. Clear the current configuration and restore some or all factory defaults, using
IP Storage Router SR2122-2 User Guide
Name: Pat Hurley
Email: phurley@abc123z.com
Phone: 123.456.7890
Pager: 123.456.3444 pin 2234
prompts to save information as desired. The storage router can be safely
powered down when the [HALTED]# command prompt appears.
the clear conf command.
Maintaining and Managing the Storage Router
183