Configuring VLAN
This chapter explains how to configure your SR2122-2 storage router for a virtual
local area network (VLAN) and contains the following sections:
■
■
■
■
■
■
■
■
You can configure for VLAN using CLI commands as described in this chapter or
via the web-based GUI. To access the web-based GUI, point your browser to the
management interface IP address of the storage router. After logging on, click the
Help link to access online help for the GUI.
IP Storage Router SR2122-2 User Guide
Prerequisite Tasks
VLAN Encapsulation
Configuration Tasks
Configuring for VLAN with VTP
Configuring for VLAN without VTP
Configuring an IP Route
Verifying and Saving Configuration
Assigning a VLAN to a SCSI Routing Instance
7
111