The SR2122-2 RIP implementation runs RIP v2 in broadcast mode. This allows
the storage router to learn from either RIP v1 or RIP v2 hosts that are operating in
broadcast mode. The storage router will not learn routes from RIP v2 hosts
operating in multicast mode.
Note:
RIP advertisements but it does not advertise.
1. enable — Enter Administrator mode
2. ip rip enable — Enable RIP listening. The storage router listens for
IP Storage Router SR2122-2 User Guide
The storage router is a passive, or silent, RIP device; it updates routes based on
advertised routes, learning routing information dynamically as it is
exchanged in the network.
Configuring System Parameters
103