Advertisement
Normal/Reverse: Alternate directions between
normal and reverse after each transition.
Reverse: Wipe in the opposite direction of the
normal direction.
Softening the wipe pattern edge (Soft
edge)
Softens the edges of a pattern.
1
Open the Home > M/E-1 > Key1 > Transition > Wipe
menu (11101.52).
2
Set the [Soft] button to the on state and set the
following parameter.
No.
Parameter
1
Soft
Setting the wipe pattern position
(Position)
You can move a wipe pattern to a desired position.
1
Open the Home > M/E-1 > Key1 > Transition > Wipe
menu (11101.52).
2
Set the [Position] button to the on state and set the
following parameters.
No.
Parameter
1
Position H
2
Position V
To return a pattern from a moved position to the
center of the screen as a transition progresses
Set the [Auto Center] button to the on state.
Rotating a wipe pattern (Rotation)
1
Open the Home > M/E-1 > Key1 > Transition > Wipe
menu (11101.52).
2
In the [Rotation] group, select a rotation type.
Angle: Wipe with a pattern at a fixed angle.
Speed: Rotate a pattern at a fixed speed.
Magnitude: Rotate a pattern through the specified
angle in a single transition.
Adjustment
Edge softness
Adjustment
Horizontal position
• Negative values move left.
• Positive values move right.
Vertical position
• Negative values move
down.
• Positive values move up.
When the [Angle] button is selected, set the following
parameter.
No.
Parameter
1
Angle
When the [Speed] button is selected, set the following
parameter.
No.
Parameter
1
Speed
When the [Magnitude] button is selected, set the
following parameters.
No.
Parameter
1
Angle
2
Magnitude
159
Adjustment
Inclination angle of pattern
• A value of –100.00
corresponds to a rotation of
one turn counterclockwise.
• A value of +100.00
corresponds to a rotation of
one turn clockwise.
• A value of 0.00
corresponds to no rotation.
Adjustment
Rotation speed of pattern
• A value of –100.00
corresponds to 1 revolution/
second counterclockwise
rotation.
• A value of +100.00
corresponds to 1 revolution/
second clockwise rotation.
• A value of 0.00
corresponds to no rotation
(stationary).
Adjustment
Angle of pattern at start of
transition
• A value of –100.00
corresponds to a rotation of
one turn counterclockwise.
• A value of +100.00
corresponds to a rotation of
one turn clockwise.
• A value of 0.00
corresponds to no rotation.
Angle of rotation through
course of transition
• A value of –200.00
corresponds to a rotation of
two turns counterclockwise.
• A value of +200.00
corresponds to a rotation of
two turns clockwise.
• A value of 0.00
corresponds to no rotation.
Advertisement
Chapters
