Advertisement
For details, see "Resetting the password of the
administrator user account" (page 67).
Rear view
e
f
g
h
i
a OUTPUT 1 to 12 connectors (BNC type)
Program outputs, preview outputs, and AUX outputs can
be assigned and output as serial video signals.
Each output can be configured with a format converter.
b OUTPUT 13 to 24 connectors (BNC type)
OUTPUT 13 to 18 can be used when an XKS-G1110
Additional I/O Board (option) is installed.
OUTPUT 19 to 24 can be used when two XKS-G1110
Additional I/O Boards (option) are installed.
Program outputs, preview outputs, and AUX outputs can
be assigned and output as serial video signals.
c INPUT 25 to 44 connectors (BNC type)
INPUT 25 to 36 can be used when an XKS-G1110
Additional I/O Board (option) is installed.
INPUT 37 to 44 can be used when two XKS-G1110
Additional I/O Boards (option) are installed.
Inputs serial video signals.
d INPUT 1 to 24 connectors (BNC type)
Inputs serial video signals.
Each input can be configured with a format converter.
e GPI connector (D-sub 25-pin)
Used as a GPI input port and GPI output port.
Can also be used as a tally input/output port.
f LAN 1 connector (RJ-45, 1000BASE-T compliant)
LAN connector for standard interface 1.
Used to control devices connected to the network of the
switcher system.
d
c
j k
l
58
b
a
m
n
g LAN 2 connector (RJ-45, 1000BASE-T compliant)
LAN connector for standard interface 2.
Used to connect with an external network.
h REF connectors (BNC type)
Connect to a tri-level sync signal or black burst signal
when using the unit synchronized to an external reference
signal.
The two connectors are loop-through connectors.
Whichever is used as the input signal, the other can be
used as an output signal. When not using loop-through,
terminate the unused connector using a 75 ohm
terminator.
i REF OUT connector (BNC type)
Outputs the internal reference signal when an external
reference signal is not being used.
j
connector (USB 3.0, Type A)
Connect to a USB device such as a USB drive or
keyboard.
k
connector (USB 2.0, Type A)
Connect to a USB device such as a USB drive or
keyboard.
l AC IN A and B connectors
Connect to an AC power supply using an AC power cord
(sold separately).
m U (signal ground) terminal
Connect to a ground wire.
s
r
q
p
o
Advertisement
Chapters
