Advertisement
1
Enable macro attachments.
For details, see "Enabling macro attachments"
(page 328).
2
Press the button with a set macro attachment.
The macro is executed according to the link mode.
During macro execution, the selected button flashes.
Executing a macro assigned to a fader
lever
1
Enable macro attachments.
For details, see "Enabling macro attachments"
(page 328).
2
Operate the fader lever.
A macro is executed when the fader lever passes the
position at which the macro attachment is set.
Notes
• If you do not move the fader lever to the operation
end position, the macro cannot be executed again.
• If executing a 2-stroke preset color mix, the macro
is executed by fader lever operation in the first
stroke. The macro is not executed by fader lever
operation in the second stroke.
Macro Timelines
Overview
A macro timeline is an effect timeline for macros.
You can execute macros in sequence by setting macro
recall/execute actions at keyframe points on an effect
timeline.
There are 99 effect timeline registers that can be used in a
macro region.
Notes
• Up to 99 macros can be executed simultaneously using
a single macro timeline.
• If multiple macros are executed at the same time, the
output may not be reproduced according to the timing
registered in the macro timeline.
• Actions configured on a macro timeline are executed
only when the macro timeline is operating in the normal
direction.
• The following cannot be set in a macro timeline.
– Keyframe loop
– Effect timeline loop
– Reverse direction execution
– Normal/reverse direction execution
– Keyframe path
Macro timeline operations
You can operate a macro timeline using the [RUN]
button/[REWIND] button in the utility/shotbox control
block or utility control block, or the [Run] button/
[Rewind] button in the menu.
Notes
• If a macro timeline has ended but a macro is still
executing, you can press the [RUN] button/[REWIND]
button or the [Run] button/[Rewind] button to terminate
the macro timeline.
• In a macro timeline, since a take operation is not
possible, if a pause event with a pause time of "0" is set
in a registered macro, the actions after the pause are not
executed. The macro timeline is terminated.
Creating a Macro Timeline
Setting an action
You can configure an action at a keyframe point on an
effect timeline.
329
Advertisement
Chapters
